Exterior Oil Designer Tester Kit Instructions

WOCA Exterior Oil Designer Tester Kit Instructions

  1. Dampen a clean cloth with water and wipe the sample evenly to open the wood grain and allow it to thoroughly dry.
  2. Pour a small amount of WOCA Exterior Oil onto the wood. Spread and polish the oil with a cloth or a piece of red pad. Leave the oil to soak on the sample for 5 minutes.
  3. Wipe off the surface oil with a cotton cloth. When finished, there should be no oil on top of the wood. Leave the sample to dry for 5 – 6 hours.
  4. Repeat the oil application with the white pad as in #2 & #3 above. You will use less oil than during the first application.

This site uses cookies to ensure you get the best experience on our website.