Hot
New
In stock

WOCA Diamond Oil Active Tester Kit - Scandinavian Wood Floor System

SKU:

PRODUCT TYPE: Tester

VENDOR: Woca Woodcare

$35.00

Hurry! Only 35 Left in Stock!

Extra White
White
Spend $699.00 to Free Shipping
PRODUCT INFORMATION
APPLICATION INSTRUCTIONS
COVERAGE
TECHNICAL DATA
PRODUCT INFORMATION

Discover Scandinavian style with the Diamond Oil Active Tester Kit.  The unique formula gives long-lasting protection and lightens your wood floors. Transform your décor and enjoy a professional finish with the pro-grade Scandinavian Wood Floor System. It offers superior protection, making it suitable for commercial and high traffic residential wood flooring. 

Best for Pine and White Oak. Results vary.

The Diamond Oil Active Tester Kit, Scandinavian Floor System includes:

3.5 oz Wood Lye White tester

.9 oz Diamond Oil Active Tester, Extra White or White

 

Diamond Oil Active Extra White contains 14% white pigment and White contains 7% white pigment.
APPLICATION INSTRUCTIONS

The unfinished wood must be sanded, clean and dry before application. Recommended sanding grit range 100-150. 

  1. Make sure wood surface is clean and dry.
  2. Shake the Wood Lye tester well.
  3. Pour the Wood Lye onto the wood and spread the lye with a cloth, paint brush or a piece of red 3M pad.  Try to achieve an even application of the lye into the wood.  
  4. The lye will not look perfect.  The polishing of the oil with the red pad will remove any imperfections during the oiling process.
  5. Leave the lye to dry at least 8 hours or overnight.
  6. Massage the Master Color Oil packet well before use.
  7. Pour half of the oil packet directly on the lye wood surface and spread it around with the RED polishing piece.
  8. Wet buff with the Red pad to force oil into the wood, buff/polish it well. Wipe off the surface oil with a cotton cloth cloth. When finished, there should be no oil on top of the sample and you should have a silky look. Leave the sample to dry for 5 – 6 hours.
  9. Repeat the oil application as in #7 & #8 above with the White pad . You will use less oil than during the first application.
Note: The use of red and white 3M pads will simulate a buffer application which forces more oil into the wood.

Tip: For fastest drying time, leave windows slightly open to ensure a steady flow of fresh oxygen.

Warning! Rags, pads or waste soaked with WOCA oil may self-ignite if improperly discarded. Immediately after use, place all rags and waste in a sealed, water filled bucket for proper disposal.

COVERAGE

1 Tester Kit cover 2-4 square feet.

TECHNICAL DATA
WOCA Master Color Oil Technical
Product properties
Solid content Approx. 60 %
pH-value
Form
Appearance
Flash point
Density 0.90-0.95 g/ml
Wear
Gloss
Weight:
Fully hard 5-7 days at 68°F and 55% humidity
Viscosity
Mixing ratio
Coverage
Colors 11 colors
Odor
Binder Vegetable oil components
Air humidity
Dilution WOCA Solvent (does not normally need to be diluted).
Sandable after
Re-treatment dry
Drying time 12-24 hours at 68°F
Application tools Paint Roller, 4 mm luv, 
Paint roller handle, 25mm, 
Telescopic rod
Pot life
Safety
Disposal Empty containers and residues to be disposed of according to local regulations.
Shelf life 3 years
Packaging 2.5 L 
Pack size:
MAL-code:
Pr. No.:
Storage + 50-68°F. Keep out of reach of children. Must not be exposed to heat (e.g. sunlight). Store frost-free.

FAQ's

What is the difference between Master Color Oil and Diamond Oil Active?

Both Master Color Oil and Diamond Oil Active are penetrating oils. They are both made with the highest quality of natural ingredients. Master Color Oil is intended for use for normal wear and tear in residential use. Diamond Oil Active is extremely durable and is most often used in high traffic, or commercial applications.

What types of wood can you use Diamond Oil Active on?

Master Color Oil can be used on oak, ash, spruce, larch, pine and teak wood species. It can be used on unfinished wood or freshly sanded woodwork.

How do I know what color to choose?

The color swatches displayed are meant to give you a basic idea of the finished product, but because of settings and color adjustments on individual computer monitors and hand-held devices, and different reactions from various woods, the color on your wood may or may not be achieved exactly as shown in the color swatches. We recommend that you use a color tester on the wood that you are going to finish in an inconspicuous area to ensure that you achieve your desired end result. Our testers include FREE GROUND SHIPPING in the Greater United States.

Can I mix the colors to create a unique color?

Yes! All the colors available can be mixed to custom create your own desired color. We do recommend that you use testers to ensure that your project achieves your desired finished color and look.

Is staining needed with WOCA Color Oil?

No staining is needed with WOCA Color Oil, as the color and finish is done in one step.

This site uses cookies to ensure you get the best experience on our website.

Accessibility Initiative Badge