WOCA Pre-Color Instructions
- Apply the undiluted Pre-Color in an even layer lengthwise onto the floor with a 1/4 inch nap paint roller.
- On vertically mounted woodwork, apply from top to bottom.
- Clean tools in water.
- Allow wood to dry for 8-12 hours.
- Clean the surface with WOCA Wood Cleaner* or loosen with green pad under floor machine.
- Vacuum the surface thoroughly.
- Finish the floor with WOCA Master Color Oil or Diamond Oil Active.
If you are unsure of what type of finishing oil to use, check out our article on selecting the right WOCA oil.