Hot
New
In stock

WOCA Master Color Oil

SKU: 532325AA

PRODUCT TYPE: Oil Finish

VENDOR: Woca Denmark

$207.00

Hurry! Only 127 Left in Stock!

Antique
Black
Brazil Brown
Castle Gray
Extra Gray
Extra White
Light Brown
Rhode Island Brown
Walnut
Natural
White
Spend $699.00 to Free Shipping
PRODUCT INFORMATION
APPLICATION INSTRUCTIONS
COVERAGE
AFTER CARE
TECHNICAL DATA
PRODUCT INFORMATION

WOCA Master Color Oil provides color and an oil finish in one step. It penetrates and hardens deep inside the wood.  As a result, wood floors become stronger and better withstand wear. Master Color Oil contains fine pigments in eleven different colors, which can be mixed to create a custom color.

If you want to achieve the signature Scandinavian wood look, purchase one of our Signature Look bundles:

Scandinavian Wood Floor System, Master Color Oil

APPLICATION INSTRUCTIONS

The unfinished wood must be sanded, clean and dry before application. Recommended sanding grit range 100-150. On vertically mounted woodwork, apply from top to bottom.

  1. Make sure wood surface is clean and dry.
  2. Shake the Wood Lye container well and pour the lye into a plastic bucket and stir regularly during application to get a uniform finish.
  3. Apply the lye, undiluted, with the WOCA Applicator, going with the grain. Coverage is approximately 250 square feet per 2.5 liter container.
  4. The lye will not look perfect.  The polishing of the oil with the red pad will remove any imperfections during the oiling process.
  5.  Leave the lye to dry at least 8 hours or overnight.
  6. Shake Master Color Oil container well before and during use.
  7. Technique A, working in a section of about 50-100 sf, with a ¼ nap paint roller or trim pad apply an even coat of oil.   Wait 5-10 minutes and then using a 175 RPM floor buffer/polisher start polishing in the oil with a RED buffing pad attached.  Or see Technique B
  8. Technique B, working in a section of about 50-100 sf, pour oil directly on floor (1 cup) and spread it around with floor polisher/buffer with RED pad attached.
  9. Polish the area with a red pad until wood appears saturated.
  10. Replace the buffing pad with a clean one and put a terry cloth towel or polishing cloth underneath the pad and buffer and polish off all excess oil.  No excess oil should be left on the wood surface
  11. After 6-8 hours of pre-hardening, the floor should be treated with a second application of oil.
  12. Still working in sections, a very small amount of oil, approx. 1-2 ounces, is poured on the floor and carefully polished into the wood with a WHITE  floor pad. Repeat until done.
  13. Repeat Step 10.  No excess oil should be left on the surface.
  14. Do not expose floor to water during cure/hardening time, approx. 5 days.
  15. After 5-7 days, clean with WOCA Natural Soap in White to provide additional protection.

    Tip: For fastest drying time, leave windows slightly open to ensure a steady flow of fresh oxygen.

    COVERAGE

    Wood Lye Coverage approx. 250 sf per 2.5 liter. Only 1 coat is necessary.

    Master Color Oil White or Extra White Coverage approx. 250 sf per 2.5 liter. This allows for 2 coats of oil, which are necessary.

    <250 sf- 1 Wood Lye, 1 Master Color Oil

    500 sf- 2 Wood Lye, 2 Master Color Oil

    750 sf- 3 Wood Lye, 3 Master Color Oil

    1000 sf- 4 Wood Lye, 4 Master Color Oil

    1250 sf- 5 Wood Lye, 5 Master Color Oil

    1500 sf- 6 Wood Lye, 6 Master Color Oil

    1750 sf- 7 Wood Lye, 7 Master Color Oil

    For every additional 250 sf, add 1 Wood Lye and 1 Master Color Oil

    AFTER CARE

    For regular cleaning of floors finished with WOCA Master Color Oil, use WOCA Natural Soap in white. See our residential maintenance guide, or commercial maintenance guide for a detailed schedule and instructions for cleaning and maintaining your floors.

    TECHNICAL DATA
    WOCA Master Color Oil Technical
    Product properties
    Solid content Approx. 60 %
    pH-value
    Form
    Appearance
    Flash point
    Density 0.90-0.95 g/ml
    Wear
    Gloss
    Weight:
    Fully hard 5-7 days at 68°F and 55% humidity
    Viscosity
    Mixing ratio
    Coverage
    Colors 11 colors
    Odor
    Binder Vegetable oil components
    Air humidity
    Dilution WOCA Solvent (does not normally need to be diluted).
    Sandable after
    Re-treatment dry
    Drying time 12-24 hours at 68°F
    Application tools Paint Roller, 4 mm luv, 
    Paint roller handle, 25mm, 
    Telescopic rod
    Pot life
    Safety
    Disposal Empty containers and residues to be disposed of according to local regulations.
    Shelf life 3 years
    Packaging 2.5 L 
    Pack size:
    MAL-code:
    Pr. No.:
    Storage + 50-68°F. Keep out of reach of children. Must not be exposed to heat (e.g. sunlight). Store frost-free.

    FAQ's

    What is the difference between Master Color Oil and Diamond Oil Active?

    Both Master Color Oil and Diamond Oil Active are penetrating oils. They are both made with the highest quality of natural ingredients. Master Color Oil is intended for use for normal wear and tear in residential use. Diamond Oil Active is extremely durable and is most often used in high traffic, or commercial applications.

    How do I know what color to choose?

    The color swatches displayed are meant to give you a basic idea of the finished product, but because of settings and color adjustments on individual computer monitors and hand-held devices, and different reactions from various woods, the color on your wood may or may not be achieved exactly as shown in the color swatches. We recommend that you use a color tester on the wood that you are going to finish in an inconspicuous area to ensure that you achieve your desired end result. Our testers include FREE GROUND SHIPPING in the Greater United States.

    Is staining needed with WOCA Color Oil?

    No staining is needed with WOCA Color Oil, as the color and finish is done in one step.

    This site uses cookies to ensure you get the best experience on our website.

    Accessibility Initiative Badge