Montage European Oak Floors Maintenance Instructions

WOCA Maintenance Oil Diamond Active or WOCA Master Color Oil are the recommended products for re-oiling maintenance. Product and room temperature should be at least 59 degrees F. Ensure good ventilation during application and drying time.

• Maintenance Oil Diamond Active ~ 1075-1350 sq/ft per 2.5 liter can
• Master Color Oil ~ 1125-1250 sq/ft per 2.5 liter can

1. Damp mop with WOCA Intensive Wood Cleaner using 3 ounces per gallon of lukewarm water. Let the floor dry completely.
2. Shake oil container well before and during use.
3. Apply approx. 1-2 ounces per 40-50 sq. ft. onto the floor and polish oil by hand or with floor machine and white floor pad.
4. It is important that the Maintenance Oil Diamond Oil Active or Master Color Oil is carefully polished into the wood. Continue polishing until the wood appears saturated and the surface looks uniform.
5. Polish off all excess oil from floor using cotton cloths under the pad before proceeding with the next section of floor to be finished. Hand wipe all edges and corners. The floor should not appear wet and no excess oil should be left on the surface.
6. When using a floor machine the oil will be pre-hardened after approx. 4 hours and may be cautiously taken into use. Manually polished floors after 24 hours.

• Do not expose floor or woodwork to water during hardening time of 24 hours.
• After 3 days the floor may be treated with WOCA Soap to provide additional protection against wear and tear.

• Do not expose floor or woodwork to water during hardening time of 7 days.
• After 7 days the floor may be treated with WOCA Soap to provide additional protection against wear and tear.

Tip: For fastest drying time, leave windows slightly open to ensure a steady flow of fresh oxygen.