Spot Remover Instructions

WOCA Spot Remover Instructions

Before using Stain Remover, test product in a small non-visible area of the floor. Ensuring that there will be no undesired reaction to the wood surface.

1. Spray Spot Remover evenly on the stain directly from the canister.
2. Leave the Spot Remover to dissolve the stain for 10-20 min.
3. Scrub with a soft bristle brush until the stain has been dissolved.
4. Repeat steps if necessary.
5. Wipe the spot with a cloth wrung out in luke-warm water.
6. When the floor is completely dry apply the original surface finish to re-establish the protection of the surface.