Patina Disc Instructions

WOCA Patina Disc Instructions

  1. A Patina Disc has one side with a very fine abrasive grit and one side with a Velcro layer which enables the disc to attach to a pad.
  2. Two Patina Discs are placed opposite to each other on a white or red pad.
  3. Apply the oil using a paint roller or a brush, hereafter polish with a pad and the two Patina Discs fixed on to the pad. The combination of light sanding and polishing helps the oil penetrate faster into the wood and results in a very smooth finish. The wood must not dry during the process of application. Always make sure that a sufficient amount of oil is applied, in order to work in well.
  4. When the surface appears saturated remove excess oil using a cotton cloth. Finally, polish with a clean white pad, in order to obtain a uniform gloss.
Warning! Risk of self-ignition! Due to the risk of self-ignition it is important that sanding dust and oil wetted cloths are soaked in water and disposed of in a tightly closed container after use.

This site uses cookies to ensure you get the best experience on our website.