WOCA Invisible Oil System

1st Coat Invisible Oil Primer

Invisible Oil Primer - 1st Coat

Invisible Oil Primer is a water-based wood primer and the first stage in a high quality water-based oiling system and must be used together with WOCA Invisible Oil.

Invisible Oil Primer coverage is approx. 210-325 sf/2.5 liter can.

Instructions Invisible Oil Primer (1st coat) Recommended product, the room and floor temperature should be between 59°F and 86°F. Wood moisture content must not exceed 12%. Make sure that the room is well ventilated for optimal evaporation and drying time.

1. Damp mop the wood with WOCA Intensive Wood Cleaner (diluted 3 ounces to 1 gallon of water) and leave the floor to dry for at least 8 hours before application of the Invisible Primer.
2. Thoroughly shake the container of primer, both before and during use. Containers with different batch numbers should be mixed to avoid color mismatch. Apply the primer using a short-bristle paint roller in an even coat. Work in small areas of no more than 100 sqft at a time. Leave the primer to soak in for up to 5 minutes. Polish the primer into the wood with a red floor pad attached to a floor machine until the floor appears saturated.
3. Remove excess primer with dry, lint-free cotton cloths or pads attached to the polishing machine until the surface no longer appears wet. Leave the floor to dry for 3-4 hours.
4. Before applying the Invisible Oil, polish the dry surface using a maroon pad and vacuum thoroughly.

2nd Coat - Invisible Oil

Invisible Oil

Invisible Oil is a water-based single-component oil and the second stage in a high quality water-based oiling system and must be used together with WOCA Invisible Oil Primer.

Coverage: Invisible Oil coverage is approximately 800-1075 sf/2.5 liter can.

5. Thoroughly shake the container of oil, both before and during use. Containers with different batch numbers should be mixed to avoid color mismatch. Apply the oil using a short-bristle paint roller in an even coat. Work in small areas of no more than 100 sf at a time. Leave the oil to soak in for up to 5 minutes. Polish the oil into the wood with a red floor pad attached to a floor machine until the floor appears saturated.
6. Remove excess oil with dry, lint-free cotton cloths or pads attached to the polishing machine until the surface no longer appears wet. Let dry for 24 hours.

3rd Coat - Invisible Oil Care

Invisible Oil Care is a water-based single-component oil that increases the oil’s ability to resist stains and wear. It is the third stage in a high quality water-based oiling system and must be used together with WOCA Invisible Oil Primer and Invisible Oil. It can also be used for future maintenance.

Coverage: Invisible Oil Care coverage is approximately 320-430 square foot per liter.

Thoroughly shake the container both before and during use. Containers with different batch numbers should be mixed to avoid color mismatch. Working in small sections, less than 100 square foot, pour 3 ounces of oil directly onto the floor and immediately polish in with a white floor pad attached to a floor machine until the floor appears saturated.
7. Remove excess oil with dry, lint-free cotton cloths or pads attached to the polishing machine until the surface no longer appears wet.
Drying time: Minimum 8 hours at 68°F Light use: 24 hours at 68°F. Do not expose the floor to water or other liquids for the first 7 days while the oil is hardening. Fully cured: 7 days at 68°F

Maintenance & Care

Weekly cleaning: Natural Soap White

Monthly cleaning: Oil Refreshing Soap White

Re-oiling Maintenance: Intensive Wood Cleaner + Invisible Oil Care