WOCA Patina Disc
WOCA Patina Disc Details
WOCA Patina Discs are used to make a one-coat application using WOCA Oils.
There are 6 discs in a pack and each disc is 150mm in diameter with a Velcro back
Application area – With the introduction of the green WOCA Patina Disc, WOCA presents a new revolutionary way of oiling floors. By using the WOCA Patina Disc it is now possible to make a one-coat application of the floor. The surface is saturated immediately, becomes hard-wearing, silky smooth, and easy to maintain.
Result – The floor is well saturated, feels soft, dries quickly and has a silky-mat gloss. In order to achieve this result, we recommend using WOCA High Solid Master Oil, natural or white. The oil has a low content of solvent and fills the grains of the wood excellently. This guarantees a hard-wearing surface.
How to Use WOCA Patina Disc
- A Patina Disc has one side with a very fine abrasive grit and one side with a Velcro layer which enables the disc to attach to a pad.
- Two Patina Discs are placed opposite to each other on a beige/red/green pad.
- Apply the oil using a paint roller or a brush, hereafter polish with a pad and the two Patina Discs fixed on to the pad. The combination of light sanding and polishing helps the oil penetrate faster into the wood and results in a very smooth finish. The wood must not dry during the process of application. Always make sure that sufficient oil is applied, in order to work wet in wet.
- When the surface appears saturated remove excess oil using a cotton cloth. Finally, polish with a clean white pad, in order to obtain a uniform gloss.
Warning! Risk of self-ignition! Due to the risk of self-ignition it is important that sanding dust and oil wetted cloths are soaked in water and disposed of in a tightly closed container after use.
Only logged in customers who have purchased this product may leave a review.