WOCA Softwood Lye Testers help you choose the right color for your project. Softwood Lye is used for lye priming of unfinished or freshly sanded interior woodwork. Results vary.
- Prevents yellowing process of the surface
- Preserves the light colors of the wood
- Requires after-treatment with oil or soap
- Only suitable for softwood
- Contains white pigments
- Certified by IBR
* PLEASE NOTE * Due to the Sodium Hydroxide found in Softwood Lye the product has been deemed hazardous by the Department of Transportation and requires special documentation and transportation. A $75.00 Hazmat Fee is mandated by the Department of Transportation and is required for ground shipping.
WOCA Softwood Lye Tester DetailsWOCA Softwood Lye Testers are used to test WOCA Softwood Lye on your project. This helps you to select the desired color for your woodwork. WOCA Softwood Lye is used for lye priming of unfinished or freshly sanded interior woodwork. The priming prevents the wood from yellowing and enhances the natural grain of the wood producing a white wash finish. Softwood Lye may be used for all types of soft wood such as pine, spruce, and pitch-pine. When used on larch wood, an antique grey/brownish finish is created. Softwood Lye can not be used on hardwood. The final color will first be achieved after 1-2 months. Results vary.
*Note - When using Softwood Lye on spruce, the wood may assume a greenish color. This will disappear in the course of time.
- The unfinished woodwork must be sanded finely (grit 100-120) and it must be completely clean and dry before application of the lye.
- Shake the container. Pour the lye into a plastic bucket and stir regularly to get a uniform result.
- Apply the lye undiluted with the WOCA Applicator, a nylon brush or roller in an even coat on the floor lengthwise. Apply at least 1 liter of lye to 107 square foot of wood. On vertically mounted woodwork, apply from bottom to top.
- After a drying time of 8 hours at 68˚F (the wood must be completely dry), de-nib standing fibers with a fine sanding polishing pad before the final basic treatment. Subsequently, vacuum the floor.
- Finish the floor with WOCA Diamond Oil, or treat with Basic Soap or Natural Soap, White.
- Clean tools in water after use.
|Declaration:||Sodium hydroxide, water, white pigments, <5% non-ionic surfactants.|
|Colours||Contains white pigments|
|Drying time||8-12 hours.|
|Application tools||WOCA Applicator, a nylon brush or roller
|Cleaning of tools:||Clean tools with water.|
|Disposal||Dispose of contents/container to an approved waste disposal plant.|
|Shelf life||3 years.|
|Storage||+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer (max. +25°C).|