Shopping Cart
WOCA Denmark - Distributed by WOCA Wood Care - A division of Natural Coatings, LLC
WOCA Denmark - Distributed by WOCA Wood Care - A division of Natural Coatings, LLC
WOCA Denmark - Distributed by WOCA Wood Care - A division of Natural Coatings, LLC

Master Color Oil

Regular price

$65.00

  • SKU:
  • Product type: Oil Finish
  • Vendor: Woca Denmark

Guaranteed safe checkout

Apple Pay
Google Pay
PayPal
Visa
MasterCard
Discover
Amarican Express
JCB Payment Accepted
Diners Club
Shopify Payments

WOCA Master Color Oil provides color and an oil finish in one step. It penetrates and hardens deep inside the wood.  As a result, wood floors become stronger and better withstand wear. Master Color Oil contains fine pigments in nine different colors, which can be mixed to create a custom color.

  • No staining is needed with WOCA Color Oil, as the color and finish is done in one step.
  • For custom colors Master Color Oils may be mixed freely to create any desired color.
WOCA Master Color Oil provides a hard wearing oil finish and color in one application. Suitable for oak, ash, spruce, larch, pine and teak, as well as cork. Master Color Oil may be used on both unfinished or freshly sanded interior woodwork.
It is recommended to use a floor buffer for the oil application. Recommended wood moisture maximum - 12%. The oiling should be done at a minimum temperature of 60º F.

Master Color Oil Application Instructions

  1. Unfinished flooring or wood should be freshly sanded with grit 100-120. Prep the wood surface with a solution of 1/4 cup Wood Cleaner per gallon water. This step is not optional.
  2. Shake the container of Color Oil well before and during application. Apply the oil in an even coat with a low nap paint roller onto an area of 100 - 200 sq. ft. Let the floor absorb the oil for 20 minutes. Work the oil into the wood with a red pad either manually or for large areas with a buffer. Polish until the floor appears saturated with oil.
  3. Remove the excess oil with lint free cloths, or scrape with a squeegee onto next section of floor to be oiled. Then buff the floor with lint free cloths under white polishing pads. The floor should not appear wet and no excess oil should be left on the surface after polishing. Continue in sections until the whole floor has been finished.
  4. Wait for 6 - 8 hours, or when dry enough to walk on.  Buff the floor with a white polishing pad and color oil. If a silk matte surface is required, the finished floor may be buffed with 1 liter of Master Color Oil to 500 - 600 s.f. of floor. The oil must be polished carefully into the floor. No excess oil should be left on the surface. After 6 - 8 hours, cover walking areas with corrugated cardboard for the 72 hours hardening period. Do not expose the floor to water during the hardening time.
Clean with Natural Soap Maintain with Maintenance Gel or  Master Color Oil, but first clean with Wood Cleaner


Coverage: Approximately 120 sqft per liter (softwoods) 150 sqft per liter (hardwoods)

Product properties
Solid content Approx. 60 %
pH-value
Form
Appearance
Flash point
Density 0.90-0.95 g/ml
Wear
Gloss
Weight:
Fully hard 5-7 days at 20°C and 55% humidity
Viscosity
Mixing ratio
Coverage
Colours 11 colours
Odour
Binder Vegetable oil components
Air humidity
Dilution WOCA Solvent (does not normally need to be diluted).
Sandable after
Re-treatment dry
Drying time 12-24 hours at 20°C
Application tools Paint Roller, 4 mm luv, article no. 88004
Paint roller handle, 25mm, article no. 599650
Telescopic rod, article no. 599651
Pot life
Safety
Disposal Empty containers and residues to be disposed of according to local regulations.
Shelf life 3 years
Packaging 1 L - 2.5 L - 5 L
Pack size:
MAL-code:
Pr. No.:
Storage + 10-25°C. Keep out of reach of children. Must not be exposed to heat (e.g. sunlight). Store frost-free.

WOCA Master Color Oil Downloads

Customer Reviews

Based on 3 reviews Write a review